Stainless Steel Float Switch Sensor for Liquid Level

MFP-3 series temperature sensor using the NTC thermistor element. It is immersing type sensor probing sensor into liquid or air chamber which temperature to be measured.

MFP-6 series temperature sensor using the NTC thermistor element.It is screw type sensor mount onto devices by screwina hausing

MF5A-6 series NTC thermistor is packed by polyimide insulation film, its flat and thin film packing enable it works for flat surface temperature sensing with fast response time and especially suitable for very compact mounting room. It is widely used for OA devices like printers, for battery pack of EV car , and many flat surface temperature sensing applications.

The MFL Series NTC Thermistor temperature sensor is made with FDA food grade Stainless steel SUS304 . It is easily installed onto coffee machine circuit with two 6.3mm plug.

MF5A-5 Series miniture NTC thermistor is made with epoxy resin coating ,and insulation lead wire like PVC wire, teflon or Kynar wire. It has advantages of miniture size, high precision and fast response.   

Stainless Steel Float Switch Sensor for Liquid Level Float liquid level switch is mainly composed of a dry reed tube and a floating ball, the magnetic material in the float, the float moves up and down with the measured liquid level, touching the dry reed tube action and detecting the liquid position.The product has the characteristics of light volume, simple working principle, high reliability and low price;A variety of materials for selection, and suitable for a variety of different liquid environment;Can be directly connected to electronic controllers, relays or contactors;The performance is stable and reliable, the water level can reach +/-1mm; Key Parameters: Typical Applications Advantages: Typical Sizes: Ordering Code: Flexible Custom Design &Development Welcomed.  Contact us now for more details or for your sensing solutions

MFP-2 series temperature sensor using the NTC thermistor element. It is surface mounting type sensor fixed to devices with mounting screw of different required size. Products can be custom according to different temperature environment or application.

Focusens MFP series HVAC averaging temperature sensor is exquisited designed for duct or pipe applications for air or water where accurate average temperature measurement is required. By using optimized sensing architecture, flexible sensing tube distribution across the airflow or pipe section, it provides a more representative temperature signal than a single-point sensor, especially in large ducts or uneven airflow conditions.