Threaded Mounting NTC Thermistor Temperature Sensor for Coffee Machine with SUS316 House

The MFL Series NTC Thermistor temperature sensor is made with FDA food grade Stainless steel SUS304 . It is easily installed onto coffee machine circuit with two 6.3mm plug.

MF52 High Temperature 200'C Epoxy NTC Thermistor made with new craft and materials, new technology of production of small type epoxy resin coating of NTC thermistor, has the advantages of high precision and fast response.

To enhance MFT Series temperature sensor humidity proof capability , protection tube usually used to cover the joint part between cable and probe.  Basically the adhensive dule wall protection tube with glue have best protection.

The temperature sensor is a kind of silicon temperature sensor, it have a positive temperature coefficient of resistance (PTC) and  suitable for use in measurement and control systems.Tolerances of 0.5% or other special selections are available on request.

I2C output Temperature Humidity Transducer

PTC Thermistor Focusens offers a comprehensive selection of motor protection, including our advanced thermistor probe PTC thermistors. These  PTC thermistors, featuring an insulated wire cable, significantly increase resistance from a few hundred ohms to several thousand ohms at their thermal switching point (Ts). This sharp resistance change allows the PTC thermistor to function as a solid-state thermal switch, ideal for triggering electronic circuits to deactivate overloaded electric motors, overheated bearings, or electrical appliances. Choose from our range of PTC thermistors with temperature switch points from 60°C to 180°C to ensure optimal protection for your equipment.

MFP-3 series temperature sensor using the NTC thermistor element. It is immersing type sensor probing sensor into liquid or air chamber which temperature to be measured.

Focusens MF58 series NTC thermistor is high precision NTC thermistor sealed in glass. In the thermistor MF58 series,we have both the axial lead type and radial leaded type. The radial leaded typer with ordering code MF58A and MF58B is sealedas small glass bead diameter Max.1.3mm and 2.2mm respectively,the axial lead part MF58C is packed in standard DO35 glass and is diode configuration. This chip in glass thermistor have standard and small size. With advanced ceramic sintering and glass sealing technique it have advantage of high precision, miniture size,fast response and reliable stability especially under 100-250'C high temperature. The MF58 thermistor is widely used for temperature sensors as well as used directly on PCB or circuit for precision temperature sensing.