IP68 Waterproof Pipe Clamp Temperature Sensor

MFE1D series pipe clamp temperature sensor have intergral probe and body , which is overmoulded with good waterproof performance thermoplastic materials . It have a standard 110mm length adjustable chain , extra chains can be added to extend the length when it is used for bigger diameter pipes.

Brand:
Focusens
Item NO.:
MFE1D
Order(MOQ):
3000
Product Origin:
Hefei,Anhui,China
Shipping Port:
Shanghai / Ningbo/Hefei/Shenzhen
Lead Time：
4 weeks
Sensing Component:
NTC Thermistor / RTD PT100/ PT1000
Working Temperature:
-30-120°C
Thermal Time:
Water (0.4m/s) T0.63 ≤ 30s
Hi-Pot:
1500V 1mA 1minute

Inquire now

Parts Selection Guide

New Products

Product Detail

-------- Trust Focusens understand considerably your considerations and concerns on choosing parameters configurations Materials --------

IP68 Waterproof Pipe Clamp Temperature Sensor

Key Parameters:

Sensing Component	NTC Thermistor various R and B value on request	Probe Material	TPE (With/Without Copper)
Working Temperature	-30-120°C	Cable Material	TPE cable
Thermal Time	Water (0.4m/s) T0.63 ≤ 30s	Sizes	adjustable
Dissipation factor	≥2.5 mW/°C	Connector	On request
Long-term stability	Drift ≤ 3% after 1000h heat or cold store (80°C / -30°C)
Hi-Pot	1500V 1mA 1minute
Insulation Resistance	DC500V min.100Mohm

Typical Applications

Floor heating system

Water pipe

Wall-hanging stove

Pipe heating system

Advantages:

IP68 Waterproof

Adjustable for different diameter pipes

Wide working temperature range

Good wether endurance

Typical Sizes:

Flexible Custom Design &Development Welcomed. Contact us now for more details or for your sensing solutions

Did you find exact part you want ? Leave a message or send us email with your requests, work out your idel part together . Flexible Custom Design &Development is Focusens Expert Skill .

Leave A Message

Any information wanted ? Leave us a message here please.

Subject : IP68 Waterproof Pipe Clamp Temperature Sensor

Related Tags :

Related Products

MFT PCB Board Mount humidity proof Temperature Sensor with Plastic House for Refrigerator

MFT series temperature sensor using NTC thermistor as temperature sensing element. Products can be custom according to different temperature environment or application. With our mature craft, it can be made with a variety of specifications, customers can use directly without fabricating.

MFE-1 IP68 TPE Overmoulding Temperature Sensor Waterproof 5x20mm Probe

MFE-1 series TPE overmould temperature sensor using NTC thermistor as temperature sensing element. Products can be custom according to different temperature environment or application. With our mature craft, it can be made with a variety of specifications, customers can use directly without fabricating.

Multi-point Averaging HVAC temperature sensor for BMS

Focusens MFP series HVAC averaging temperature sensor is exquisited designed for duct or pipe applications for air or water where accurate average temperature measurement is required. By using optimized sensing architecture, flexible sensing tube distribution across the airflow or pipe section, it provides a more representative temperature signal than a single-point sensor, especially in large ducts or uneven airflow conditions.

Differential Pressure Transmitter for HVAC & Fresh Air Systems

This differential pressure transmitter is specially designed for HVAC and fresh air systems, providing accurate and stable air pressure measurement for ducts, filters and ventilation equipment to ensure efficient airflow monitoring and system control. As a reliable HVAC pressure sensor, it supports low pressure differential measurement and is widely used in building automation and ventilation applications.

Flat Surface Temperature Sensor for Power Supply MFP-2 Series

MFP-2 series temperature sensor using the NTC thermistor element. It is surface mounting type sensor fixed to devices with mounting screw of different required size. Products can be custom according to different temperature environment or application.

MFT Series Low Temperature Sensor with Plastic House for Freezer Refrigerator

3000V High Voltage Surface Temperature Sensor MFP-2 Series

FHT31 series Duct Temperature Humidity Transmitter Currency Output

Focusens FHT31 series temperature humidity transmitter is a cost effective, highly accurate and reliable solution for measuring relative air humidity and temperature. The enclosure minimizes installation costs and provides outstanding protection against contamination and condensation, thus ensuring flawless operation. The FHT31 use the reliable humidity / temperature Sensirion sensor element SHT21 with excellent long term stability and resistance against pollutants. In combination with a long calibration experience, the FHT31 provides a measurement accuracy of ±3%RH and is available for wall-mounted with current, voltage output.

Address :
No.1 XiSan Road, Electromechanical Industry Park , High&New Tech.Zone. Hefei,Anhui,China
Call Us :
Tel : +86-551-69109668

Whatsapp : +86-13339100504
Contact Us :
Email : info@focusens.com

Skype : melodyliu520

About Us

With more than 15 years field experience,we are committed to provide reliable,high cost performance and flexible sensor solution and components. Resistance temperature sensors NTC,PTC,RTD, Digital Temperature sensors and humidity Transmitters, as well as magnatic switch sensors are our main products.

Follow us