Differential pressure transmitter for HVAC air flow monitoring

Differential Pressure Transmitter for HVAC & Fresh Air Systems

This differential pressure transmitter is specially designed for HVAC and fresh air systems, providing accurate and stable air pressure measurement for ducts, filters and ventilation equipment to ensure efficient airflow monitoring and system control. As a reliable HVAC pressure sensor, it supports low pressure differential measurement and is widely used in building automation and ventilation applications.

Brand:
Focusens
Order(MOQ):
10
Product Origin:
Hefei,Anhui,China
Shipping Port:
Shanghai/Ningbo/Hefei/Shenzhen
Lead Time：
4 weeks
Sensing Component:
MEMS differential pressure sensing element
Working Temperature:
-10°C to +50°C (HVAC environment)
Thermal Time:
≤ 1 s (typical)
Hi-Pot:
1500 VAC, 1 min

Inquire now

Parts Selection Guide

New Products

Product Detail

Differential Pressure Transmitter for HVAC & Fresh Air Systems

The differential pressure transmitter is designed for accurate measurement of air pressure differences in HVAC and fresh air systems. It provides stable and reliable monitoring of airflow, filter status and duct pressure, helping HVAC control systems optimize energy efficiency and maintain indoor air quality. With high sensitivity for low pressure measurement, it is an ideal HVAC pressure sensor for ventilation and building automation applications.

Key Parameters

Sensing Component	MEMS differential pressure sensing element	Power Supply	12–24 V DC
Working Temperature	-10~50°C	Probe Material	N/A (air pressure ports)
Accuracy	±1.0% FS (typical)	Wire Layout	2/3/4 wires (optional)
Response	≤ 1s response time	Cable material	PVC / Silicone (optional)
Output	4–20 mA / 0–10 V / RS485	Sizes	On request
Drift	≤ ±0.5% FS/year	Connector	On request

Typical Applications

HVAC airflow monitoring systems
Fresh air and ventilation systems
Air handling units (AHU)
Filter clogging detection
Clean room pressure monitoring
Building automation pressure sensor networks

Duct pressure measurement and control

Typical Features

Ordering Information

Flexible custom design & development are welcomed. Contact us now for more details or for your sensing solutions.

Leave A Message

Any information wanted ? Leave us a message here please.

Subject : Differential Pressure Transmitter for HVAC & Fresh Air Systems

Related Tags :

Related Products

MFT PCB Board Mount humidity proof Temperature Sensor with Plastic House for Refrigerator

MFT series temperature sensor using NTC thermistor as temperature sensing element. Products can be custom according to different temperature environment or application. With our mature craft, it can be made with a variety of specifications, customers can use directly without fabricating.

MFE-1 IP68 TPE Overmoulding Temperature Sensor Waterproof 5x20mm Probe

MFE-1 series TPE overmould temperature sensor using NTC thermistor as temperature sensing element. Products can be custom according to different temperature environment or application. With our mature craft, it can be made with a variety of specifications, customers can use directly without fabricating.

IP68 Waterproof Pipe Clamp Temperature Sensor

MFE1D series pipe clamp temperature sensor have intergral probe and body , which is overmoulded with good waterproof performance thermoplastic materials . It have a standard 110mm length adjustable chain , extra chains can be added to extend the length when it is used for bigger diameter pipes.

Multi-point Averaging HVAC temperature sensor for BMS

Focusens MFP series HVAC averaging temperature sensor is exquisited designed for duct or pipe applications for air or water where accurate average temperature measurement is required. By using optimized sensing architecture, flexible sensing tube distribution across the airflow or pipe section, it provides a more representative temperature signal than a single-point sensor, especially in large ducts or uneven airflow conditions.

THD2X series Temperature Humidity Transducer Module I2C output

I2C output Temperature Humidity Transducer

M3 Thread Mount Temperature Sensor for Cooking Device MFP Series

M3 Thread Mount Temperature Sensor using the NTC thermistor element.It is screw type sensor mount onto devices by screwina hausing.t Products can be custom according to different temperature environment or application.

Mini NTC Thermistor Temperature Sensor for Medical Warmer Blanket

Focusens FHR400 series interchangeable NTC temperature sensor are specifically used for patient temperature monitoring .

MF5A-4E Interchangeable Thermistor NTC Polymide Encapsuled With Enameled Lead Wire

MF5A-4 Series bead temperature thermistor is made with epoxy resin coating and enamelled insulation lead wire . Its small bead Min.1.1mm enable it fast response. The enamelled wire have small OD like 0.25mm or 0.3mm and the insulation character makes it specially suitable for narrow installation environment like precision meters . Avaliable from generally precision 1% to surper high precision 0.2% and loose tolerence 5% .

Address :
No.1 XiSan Road, Electromechanical Industry Park , High&New Tech.Zone. Hefei,Anhui,China
Call Us :
Tel : +86-551-69109668

Whatsapp : +86-13339100504
Contact Us :
Email : info@focusens.com

Skype : melodyliu520

About Us

With more than 15 years field experience,we are committed to provide reliable,high cost performance and flexible sensor solution and components. Resistance temperature sensors NTC,PTC,RTD, Digital Temperature sensors and humidity Transmitters, as well as magnatic switch sensors are our main products.

Follow us