MFE-1 IP68 TPE Overmoulding Temperature Sensor Waterproof 5x20mm Probe

MFE-1 series TPE overmould temperature sensor using NTC thermistor as temperature sensing element. Products can be custom according to different temperature environment or application.

With our mature craft, it can be made with a variety of specifications, customers can use directly without fabricating.

Brand:
Focusens
Item NO.:
MFE-1
Product Origin:
Hefei,Anhui,China
Shipping Port:
Shanghai / Ningbo/Hefei/Shenzhen
Lead Time：
4 weeks
Sensing Component:
NTC Thermistor various R and B value on request
Working Temperature:
-40°C to +105°C
Thermal Time:
30s
Hi-Pot:
1500V

Inquire now

Parts Selection Guide

New Products

Product Detail

-------- Trust Focusens understand considerably your considerations and concerns on choosing parameters configurations Materials --------

Typical Applications

Features

Ice maker machine

Refrigerator

Heat Pump

Water heater

Floor heating System

General Application etc.

Plastic housings PBT ABS Nylon or SUS，Cu for food grade

Waterproof for high Humidity Environment

Suitable for low temperature working

Technical Data

Item	Parameter
Sensing Element	NTC Thermistor various R and B value on request
Temperature range	-40°C to +105°C
Response time	Water (0.4m/s) T0.63 ≤ 30s
Dissipation Factor	≥ 2.5mW/°C
Long-term stability	Drift ≤ 3% after 1000h heat or cold store (80°C / -30°C)
Dielectric Strength	1500VAC
Insulation Resistance	≥100MΩ 500VDC

Typical Probe Size :

Did you find exact part you want ? Leave a message or send us email with your requests, work out your idel part together . Flexible Custom Design &Development is Focusens Expert Skill .

Leave A Message

Any information wanted ? Leave us a message here please.

Subject : MFE-1 IP68 TPE Overmoulding Temperature Sensor Waterproof 5x20mm Probe

Related Tags :

Related Products

MFT PCB Board Mount humidity proof Temperature Sensor with Plastic House for Refrigerator

MFT series temperature sensor using NTC thermistor as temperature sensing element. Products can be custom according to different temperature environment or application. With our mature craft, it can be made with a variety of specifications, customers can use directly without fabricating.

IP68 Waterproof Pipe Clamp Temperature Sensor

MFE1D series pipe clamp temperature sensor have intergral probe and body , which is overmoulded with good waterproof performance thermoplastic materials . It have a standard 110mm length adjustable chain , extra chains can be added to extend the length when it is used for bigger diameter pipes.

Multi-point Averaging HVAC temperature sensor for BMS

Focusens MFP series HVAC averaging temperature sensor is exquisited designed for duct or pipe applications for air or water where accurate average temperature measurement is required. By using optimized sensing architecture, flexible sensing tube distribution across the airflow or pipe section, it provides a more representative temperature signal than a single-point sensor, especially in large ducts or uneven airflow conditions.

Differential Pressure Transmitter for HVAC & Fresh Air Systems

This differential pressure transmitter is specially designed for HVAC and fresh air systems, providing accurate and stable air pressure measurement for ducts, filters and ventilation equipment to ensure efficient airflow monitoring and system control. As a reliable HVAC pressure sensor, it supports low pressure differential measurement and is widely used in building automation and ventilation applications.

Silicon PTC Thermistor Temperature Sensor FTY Series

The temperature sensor is a kind of silicon temperature sensor, it have a positive temperature coefficient of resistance (PTC) and suitable for use in measurement and control systems.Tolerances of 0.5% or other special selections are available on request.

MF5A-5 Series Insulation Leads NTC Thermistor 10K or 8K 3988 for autombile seat heating

MF5A-5 Series miniture NTC thermistor is made with epoxy resin coating ,and insulation lead wire like PVC wire, teflon or Kynar wire. The values 10K ohm B25/100:3988 and 8K ohm B25/100:3988 is typical parameters for auto.seat or steering wheel heating system due to it special character of miniture bead, wide working temperature range, as well as its advantage of high steability and realibility .

Thread Mount DS18B20 Temperature Sensor Probe

The DS18B20 digital thermometer provides 9-bit to 12-bit Celsius temperature measurements and has an alarm function with nonvolatile user-programmable upper and lower trigger points. The DS18B20 communicates over a 1-Wire bus that by definition requires only one data line (and ground) for communication with a central microprocessor.

Threaded Mounting NTC Thermistor Temperature Sensor for Coffee Machine with SUS316 House

The MFP Series NTC Thermistor temperature sensor is made with FDA food grade Stainless steel SUS316 . Its M10 thread makes the sensor mounting easily and solid.

Address :
No.1 XiSan Road, Electromechanical Industry Park , High&New Tech.Zone. Hefei,Anhui,China
Call Us :
Tel : +86-551-69109668

Whatsapp : +86-13339100504
Contact Us :
Email : info@focusens.com

Skype : melodyliu520

About Us

With more than 15 years field experience,we are committed to provide reliable,high cost performance and flexible sensor solution and components. Resistance temperature sensors NTC,PTC,RTD, Digital Temperature sensors and humidity Transmitters, as well as magnatic switch sensors are our main products.

Follow us