Silicon PTC Thermistor Temperature Sensor for EV car Motor Protection FTY Series

The temperature sensor is a kind of silicon temperature sensor, it have a positive temperature coefficient of resistance (PTC) and  suitable for use in measurement and control systems.Tolerances of 0.5% or other special selections are available on request.

KTY Series temperature sensor is simple and economical temperature sensing solution for general conditions that do not have high temperature and humidity.

KTY Series temperature sensor is simple and economical temperature sensing solution for general conditions that do not have high temperature and humidity.

The temperature sensor is a kind of silicon temperature sensor, it have a positive temperature coefficient of resistance (PTC ) and suitable for use in measurement and control systems. Tolerances of 0.5% or other special selections are available on request.

MFP-3 series temperature sensor using the NTC thermistor element. It is immersing type sensor probing sensor into liquid or air chamber which temperature to be measured.

Focusens FHR4210 series interchangeable NTC temperature sensor are specifically used for baby incubator temperature monitoring. Different connector interface available to be compatible with different monitoring equipments. Such as GE, HP, Japan photoelectric, philips, Siemens, mindray, treasure Wright monitor, etc.

This sensor is essentially a reed switch, encased in an ABS plastic shell. Normally the reed is 'open' (no connection between the two wires). The other half is a magnet. They're often used to detect when a door or drawer is open, which is why they have mounting tabs and screws.

Focusens FHT31 series temperature humidity transmitter is a cost effective, highly accurate and reliable solution for measuring relative air humidity and temperature. The enclosure minimizes installation costs and provides outstanding protection against contamination and condensation, thus ensuring flawless operation. The FHT31 use the reliable humidity / temperature Sensirion sensor element SHT21 with excellent long term stability and resistance against pollutants. In combination with a long calibration experience, the FHT31 provides a measurement accuracy of ±3%RH and is available for wall-mounted with current, voltage output.