M3 Thread Mount Temperature Sensor for Cooking Device MFP Series

Focusens MFP-6 series Screw Threaded NTC Thermistors are made for surface temperature measurement, sensing, and control. It is easily mounted sensor with brass or aluminum metal screw. It is especially ideal thermal solution when good electrical insulation and good thermal contact with the chassis or wall is required.

Brand:
Focusens
Item NO.:
MFP-6
Order(MOQ):
3000
Product Origin:
Hefei,Anhui,China
Shipping Port:
Shanghai / Ningbo/Hefei/Shenzhen
Lead Time：
4 weeks
Sensing Component:
NTC Thermistor various R and B value on request
Working Temperature:
-30-125°C
Thermal Time:
Water (0.4m/s) T0.63 ≤ 30s
Hi-Pot:
1500V 1mA 1minute

Inquire now

Parts Selection Guide

New Products

Product Detail

M3 Thread Mount Temperature Sensor for Cooking Device MFP Series

Thread Mount Temperature Sensor using the NTC thermistor element.It is screw type sensor mount onto devices by a M3 or specified screw thread . Products can be custom according to different temperature environment or application.

Key Parameters:

Sensing Component	NTC Thermistor various R and B value on request	Probe Material	Brass/AL
Working Temperature	-30-125°C	Cable Material	PVC/Teflon wire
Thermal Time	Water (0.4m/s) T0.63 ≤ 30s	Sizes	On request
Dissipation factor	≥2.5 mW/°C	Connector	On request
Long-term stability	Drift ≤ 3% after 1000h heat or cold store (80°C / -30°C)
Hi-Pot	1500V 1mA 1minute
Insulation Resistance	DC500V min.100Mohm

Typical Applications

Wall-mounted furnace water heater

Cylinder cavity

Temperature measurement in pipeline

Household/ Commercial Oven battery

Coffee Machine

Electric pressure cooker

Advantages:

Easy mounting with thread
Rugged construction
Assembly threaded screw mounting
direct contact and fast thermal response

Typical Sizes:

Standard RT and Tolerence:

Ordering Code:

Alternative sensing version PT1000 / PT1000/ Thermocouple T type / Thermocouple K type available with same featured mounting configuration .

Leave A Message

Any information wanted ? Leave us a message here please.

Subject : M3 Thread Mount Temperature Sensor for Cooking Device MFP Series

Related Tags :

Related Products

Flange Mount NTC Temperature Sensor for Cooking Oven MFP-4 Series

MFP-4 series temperature sensor using the NTC thermistor element. It is flange mounting type sensor probing sensor into liquid or air chamber which temperature to be measured.Products can be custom according to different temperature environment or application.With our mature craft, it can be made with a variety of specifications,customers can usedirectly without abricating.

High Temperature Oven Sensor Flange Installation

Focusens MZP-4 series oven temperature sensor are specifically designed for high temperature household and commercial ovens. The craft and materials enable it workable for high temperature upto 500’C. With flexible design and custom in house capability , we have full ranges of oven temperature meeting different electrical and mounting requirements.

FDA compliance food Temperature Sensor for sous vide with Mineral insulated Cable

NTC Thermistor sous vide cooking Temperature Sensor

FDA compatiable Meat Temperature Probe for Household Oven

NTC Thermistor Meat Temperature Sensor for BBQ

MF58 High Temperature Glass NTC Thermistor with Radial Lead

Focusens MF58 series NTC thermistor is high precision NTC thermistor sealed in glass. In the thermistor MF58 series,we have both the axial lead type and radial leaded type. The radial leaded typer with ordering code MF58A and MF58B is sealedas small glass bead diameter Max.1.3mm and 2.2mm respectively,the axial lead part MF58C is packed in standard DO35 glass and is diode configuration. This chip in glass thermistor have standard and small size. With advanced ceramic sintering and glass sealing technique it have advantage of high precision, miniture size,fast response and reliable stability especially under 100-250'C high temperature. The MF58 thermistor is widely used for temperature sensors as well as used directly on PCB or circuit for precision temperature sensing.

10mm 12mm Thermistor Probes for Human Body Surface Temperature Monitor 2.252K ohms

Focusens FHR400 series high precision NTC temperature sensor are specifically used for medical application patient body temperature monitoring . It is compatible with all accept YSI 400 series sensor monitoring equipment. Such as GE, HP, Japan photoelectric, philips, Siemens, mindray, treasure Wright monitor, etc.

Thermistor Temperature Sensor with Epoxy Coating

MFE-2 series temperature sensor is epoxy encapsulation type sensor. NTC, RTD elements are most popular sensing element. Special advantage of MFE-2 series is cost saving and compact size.

FHT20 series Wall Mount Temperature Humidity Transmitter 0-10V Voltage Output

Focusens FHT20 series temperature humidity transmitter is a cost effective, highly accurate and reliable solution for measuring relative air humidity and temperature. The enclosure minimizes installation costs and provides outstanding protection against contamination and condensation, thus ensuring flawless operation. The FHT20 use the reliable humidity / temperature Sensirion sensor element SHT21 with excellent long term stability and resistance against pollutants. In combination with a long calibration experience, the FHT20 provides a measurement accuracy of ±3%RH and is available for wall-mounted with current, voltage output.

Address :
No.1 XiSan Road, Electromechanical Industry Park , High&New Tech.Zone. Hefei,Anhui,China
Call Us :
Tel : +86-551-69109668

Whatsapp : +86-13339100504
Contact Us :
Email : info@focusens.com

Skype : melodyliu520

About Us

With more than 15 years field experience,we are committed to provide reliable,high cost performance and flexible sensor solution and components. Resistance temperature sensors NTC,PTC,RTD, Digital Temperature sensors and humidity Transmitters, as well as magnatic switch sensors are our main products.

Follow us