other

test

The DS18B20 digital thermometer provides 9-bit to 12-bit Celsius temperature measurements and has an alarm function with nonvolatile user-programmable upper and lower trigger points.

  • Brand:

    Focusens
  • Item NO.:

    FST-DS18B20
  • Order(MOQ):

    3000
  • Product Origin:

    Hefei,Anhui,China
  • Color:

    Flexible customized with black as standard
  • Shipping Port:

    Shanghai / Ningbo/Hefei/Shenzhen
  • Lead Time:

    4 weeks
  • Sensing Component:

    DS18B20
  • Working Temperature:

    -55- 125°C.
  • Thermal Time:

    10-30s
  • Hi-Pot:

  • Product Detail


1 Wire DS18B20 Temperature Sensor in Series


The DS18B20 digital thermometer provides 9-bit to 12-bit Celsius temperature measurements and has an alarm function with nonvolatile user-programmable upper and lower trigger points. The DS18B20 communicates over a 1-Wire bus that by definition requires only one data line (and ground) for communication with a central microprocessor. It has an operating temperature range of-55°C to +125°C and is accurate to ±0.5°C over the range of-10C to +85.



Key Parameters:

Sensing Component

DS18B20

Power Supply

3.0~5.5V

Working Temperature

-55- 125°C.

Probe Material

SUS304 /SUS316

Accuracy

±0.5°C accuracy from –10°C to +85°C

/±2°C accuracy from -55°C to +125°C

Wire Layout

1wires

Response

Converts temperature to 12-bit digital word in 750 ms (max.)

Cable Material

Teflon/ Fiber Glass

Output

Open-drain 1-Wire interface pin.

Sizes

On request

Drift

±0.2°C on a 1000h stress test at +125°C with VDD= 5.5V

Connector

On request


Typical Applications

Household and commercial Ovens

Food process Equipments

High Temperature material treatment Equipments


Typical Sizes:


Ordering Code:

Flexible Custom Design &Development Welcomed.  Contact us now for more details or for your sensing solutions



Leave A Message
Any information wanted ? Leave us a message here please.
Related Products
NTC Temperature Sensor for Oven
Screw Thread Mount Immersion Temperature Sensor MFP-6 Series
MFP-6 series temperature sensor using the NTC thermistor element.It is screw type sensor mount onto devices by screwina hausing.t Products can be custom according to different temperature environment or application
PTC Thermistor 1K ohms
PTC Thermistor 1K ohmsTemperature Sensor Pottered in Maylar Tube
The temperature sensor is a kind of silicon temperature sensor, it have a positive temperature coefficient of resistance (PTC ) and suitable for use in measurement and control systems. Tolerances of 0.5% or other special selections are available on request.
Flexible averaging temperature probe
Multi-point Averaging HVAC temperature sensor for BMS
Focusens MFP series HVAC averaging temperature sensor is exquisited  designed for duct or pipe applications for air or water where accurate average temperature measurement is required. By using optimized sensing architecture, flexible sensing tube distribution across the airflow or pipe section, it provides a more representative temperature signal than a single-point sensor, especially in large ducts or uneven airflow conditions.
DS18B20 Temperature Sensor
Tubular DS18B20 Temperature Sensor Probe
The DS18B20 digital thermometer provides 9-bit to 12-bit Celsius temperature measurements and has an alarm function with nonvolatile user-programmable upper and lower trigger points.
TPE Overmoulding Temperature Sensor
MFE-1 IP68 TPE Overmoulding Temperature Sensor Waterproof 5x20mm Probe
MFE-1 series TPE overmould temperature sensor using NTC thermistor as temperature sensing element. Products can be custom according to different temperature environment or application. With our mature craft, it can be made with a variety of specifications, customers can use directly without fabricating.
PTC Thermistor
LPTC Linear Silicon PTC Thermistor with Radial Lead
LPTC series silicon PTC thermistor with Radial Lead and epoxy coating. Base on typical RT value in below ordering table, Resistance adjustable accordingly on request.
PT Temperature Sensor with Film
Film Insulation PT RTD Temperature Sensor for Warming Blanket
Focusens MZP-4 series oven temperature sensor are specifically designed for high temperature household and commercial ovens. The craft and materials enable it workable for high temperature upto 500’C. With flexible design and custom in house capability , we have full ranges of oven temperature meeting different electrical and mounting requirements.
Leave A Message
Any information wanted ? Leave us a message here please.

Home

Products

about

contact