6.3mm Plug Mounting NTC Thermistor Temperature Sensor for Coffee Machine with SUS304 House

The MFP Series NTC Thermistor temperature sensor is made with FDA food grade Stainless steel SUS316 . Its M10 thread makes the sensor mounting easily and solid.

PTC Thermistor Focusens offers a comprehensive selection of motor protection, including our advanced thermistor probe PTC thermistors. These  PTC thermistors, featuring an insulated wire cable, significantly increase resistance from a few hundred ohms to several thousand ohms at their thermal switching point (Ts). This sharp resistance change allows the PTC thermistor to function as a solid-state thermal switch, ideal for triggering electronic circuits to deactivate overloaded electric motors, overheated bearings, or electrical appliances. Choose from our range of PTC thermistors with temperature switch points from 60°C to 180°C to ensure optimal protection for your equipment.

MFP-2 series temperature sensor using the NTC thermistor element. It is surface mounting type sensor fixed to devices with mounting screw of different required size. Products can be custom according to different temperature environment or application.

The DS18B20 digital thermometer provides 9-bit to 12-bit Celsius temperature measurements and has an alarm function with nonvolatile user-programmable upper and lower trigger points.

The DS18B20 digital thermometer provides 9-bit to 12-bit Celsius temperature measurements and has an alarm function with nonvolatile user-programmable upper and lower trigger points.

MFP-2 series temperature sensor using the NTC thermistor element. It is surface mounting type sensor fixed to devices with mounting screw of different required size. Products can be custom according to different temperature environment or application.

RTD (Resistance Temperature Detector) is a sensor whose resistance changes as its temperature changes. The resistance increases as the temperature of the sensor increases. The resistance vs temperature relationship is well known and is repeatable over time. An RTD is a passive device. It does not produce an output on its own. External electronic devices are used to measure the resistance of the sensor by passing a small electrical current through the sensor to generate a voltage. Typically 1 mA or less measuring current, 5 mA maximum without the risk of self-heating.

MFP-5 series temperature sensor adopts NTC thermistor element.It's a flat metal case with a surface temperature measurement.