other

MF5A-5 Series Epoxy NTC Thermistor with Insulation Lead Wire

MF5A-5 Series miniture NTC thermistor is made with epoxy resin coating ,and insulation lead wire like PVC wire, teflon or Kynar wire. It has advantages of miniture size, high precision and fast response.   

  • Brand:

    Focusens
  • Item NO.:

    MF5A-5
  • Product Origin:

    Hefei,Anhui,China
  • Shipping Port:

    Shanghai / Ningbo/Hefei/Shenzhen
  • Lead Time:

    1-2 weeks
  • Sensing Component:

    NTC
  • Working Temperature:

    -55°C to +125°C
  • Thermal Time:

    ≤ 10s
  • Product Detail

Technical Data

Item

Temperature

Temperature range

-55°C to +125°C

Response time

Water (0.4m/s) T0.63 ≤ 7s

Dissipation factor

≥ 2mW/°C

Long-term stability

Drift ≤ 3% after 1000h heat or cold store (80°C / -30°C)

Dielectric Strength

1500VAC

Insulation Resistance

≥200MΩ 500VDC


Dimensions:



Leave A Message
Any information wanted ? Leave us a message here please.
Related Products
NTC thermistor in glass
MF58 High Temperature Glass NTC Thermistor with Radial Lead
Focusens MF58 series NTC thermistor is high precision NTC thermistor sealed in glass. In the thermistor MF58 series,we have both the axial lead type and radial leaded type. The radial leaded typer with ordering code MF58A and MF58B is sealedas small glass bead diameter Max.1.3mm and 2.2mm respectively,the axial lead part MF58C is packed in standard DO35 glass and is diode configuration. This chip in glass thermistor have standard and small size. With advanced ceramic sintering and glass sealing technique it have advantage of high precision, miniture size,fast response and reliable stability especially under 100-250'C high temperature. The MF58 thermistor is widely used for temperature sensors as well as used directly on PCB or circuit for precision temperature sensing.
epoxy thermistor ntc
MF52 High Low Temperature -80 to 200'C Epoxy NTC Thermistor
MF52 High Temperature 200'C Epoxy NTC Thermistor made with new craft and materials, new technology of production of small type epoxy resin coating of NTC thermistor, has the advantages of high precision and fast response.
film NTC
MF5A-6 Series Thin Film Insulation NTC Thermistor
MF5A-6 series NTC thermistor is packed by polyimide insulation film, its flat and thin film packing enable it works for flat surface temperature sensing with fast response time and especially suitable for very compact mounting room. It is widely used for OA devices like printers, for battery pack of EV car , and many flat surface temperature sensing applications.
NTC thermistor for thermometer
MF5A-4 Series Epoxy NTC Thermistor With Enameled Lead Wire
MF5A-4 Series bead temperature thermistor is made with epoxy resin coating and enamelled insulation lead wire . Its small bead Min.1.1mm enable it fast response.  The enamelled wire have small OD like 0.25mm or 0.3mm and the insulation character makes it specially suitable for narrow installation environment like precision meters .
NTC thermistor
MF5A-5 Series Epoxy NTC Thermistor with PTFE Lead Wire
MF5A-5 Series miniture NTC thermistor is made with epoxy resin coating ,and insulation lead wire like PVC wire, teflon or Kynar wire. It has advantages of miniture size, high precision and fast response.   
glass NTC thermistor
MF58C High Temperature Glass NTC Thermistor with Axial Lead
Focusens MF58 series NTC thermistor is high precision NTC thermistor sealed in glass. There are two lead type of MF58 thermistor, the radial lead type with ordering code MF58A and MF58B is sealedas small glass bead diameter Max.1.5mm and 2.2mm respectively,the axial lead part MF58C is packed in standard DO35 glass. This chip in glass thermistor have standard and small size. With advanced ceramic sintering and glass sealing technique it have advantage of high precision, miniture size,fast response and reliable stability especially under 100-250'C high temperature. The MF58 thermistor is widely used for temperature sensors as well as used directly on PCB or circuit for precision temperature sensing.
NTC thermistor for thermometer
MF5A-4E Polymide Encapsuled Thermistor NTC With Enameled Lead Wire
MF5A-4 Series bead temperature thermistor is made with epoxy resin coating and enamelled insulation lead wire . Its small bead Min.1.1mm enable it fast response.  The enamelled wire have small OD like 0.25mm or 0.3mm and the insulation character makes it specially suitable for narrow installation environment like precision meters . Avaliable from generally precision 1% to surper high precision 0.2% and loose tolerence 5% .
Frame Lead wire thermistor
MF52 Epoxy NTC Thermistor with Frame Lead wire
MF52 High Temperature 200'C Epoxy NTC Thermistor made with new craft and materials, new technology of production of small type epoxy resin coating of NTC thermistor, has the advantages of high precision and fast response.
Leave A Message
Any information wanted ? Leave us a message here please.

Home

Products

about

contact