MF5A-5 Series miniture NTC thermistor is made with epoxy resin coating ,and insulation lead wire like PVC wire, teflon or Kynar wire. The values 10K ohm B25/100:3988 and 8K ohm B25/100:3988 is typical parameters for auto.seat or steering wheel heating system due to it special character of miniture bead, wide working temperature range, as well as its advantage of high steability and realibility .
This AT1315 door switch sensor is often used to detect when a door or drawer is open, it have mounting tabs and holes to screws onto door wall. Both working model NO and NC options available .
The DS18B20 digital thermometer provides 9-bit to 12-bit Celsius temperature measurements and has an alarm function with nonvolatile user-programmable upper and lower trigger points. The DS18B20 communicates over a 1-Wire bus that by definition requires only one data line (and ground) for communication with a central microprocessor.
The MZ6 Series PTC Thermistor are used to monitor and protect motor from over temperature. Temperature range is from 60 to 180°C. PTC thermistor beads with different rated response temperatures can be connected in series as duel, triple or Sextuple .
MFP-4 series temperature sensor using the NTC thermistor element. It is flange mounting type sensor probing sensor into liquid or air chamber which temperature to be measured.Products can be custom according to different temperature environment or application.With our mature craft, it can be made with a variety of specifications,customers can usedirectly without abricating.
+86-551-69109668
