MFT series temperature sensor using NTC thermistor as temperature sensing element. Products can be custom according to different temperature environment or application. With our mature craft, it can be made with a variety of specifications, customers can use directly without fabricating.
MFE1D series pipe clamp temperature sensor have intergral probe and body , which is overmoulded with good waterproof performance thermoplastic materials . It have a standard 110mm length adjustable chain , extra chains can be added to extend the length when it is used for bigger diameter pipes.
Focusens MF58 series NTC thermistor is high precision NTC thermistor sealed in glass. In the thermistor MF58 series,we have both the axial lead type and radial leaded type. The radial leaded typer with ordering code MF58A and MF58B is sealedas small glass bead diameter Max.1.3mm and 2.2mm respectively,the axial lead part MF58C is packed in standard DO35 glass and is diode configuration. This chip in glass thermistor have standard and small size. With advanced ceramic sintering and glass sealing technique it have advantage of high precision, miniture size,fast response and reliable stability especially under 100-250'C high temperature. The MF58 thermistor is widely used for temperature sensors as well as used directly on PCB or circuit for precision temperature sensing.
MF52 High Temperature 200'C Epoxy NTC Thermistor made with new craft and materials, new technology of production of small type epoxy resin coating of NTC thermistor, has the advantages of high precision and fast response.
Focusens MFP series HVAC averaging temperature sensor is exquisited designed for duct or pipe applications for air or water where accurate average temperature measurement is required. By using optimized sensing architecture, flexible sensing tube distribution across the airflow or pipe section, it provides a more representative temperature signal than a single-point sensor, especially in large ducts or uneven airflow conditions.
+86-551-69109668
